Friday, January 25, 2019

Lexus LX570 J200 Denso 89663-60P50

Firmware for car Lexus LX570, the body of the J200,

engine: 5.7 I petrol, 3UR,

control unit: Denso,

software version: 89663-60P50,

in the firmware, catalysts (Euro2), purging of SAP catalysts (you can disconnect the connector from the secondary air pump, the valve and the pressure sensors must be connected), ventilation of the EVAP fuel tank and chip tuning with an increase in power and torque by 10%.

Lexus LX570 J200 Denso 89663-60P31

Firmware for car Lexus LX570, the body of the J200,

engine: 5.7 I petrol, 3UR,

control unit: Denso,

software version: 89663-60P31,

in the firmware, catalysts (Euro2), purging of SAP catalysts (you can disconnect the connector from the secondary air pump, the valve and the pressure sensors must be connected), ventilation of the EVAP fuel tank and chip tuning with an increase in power and torque by 10%.

Lexus LX570 J200 Denso 89663-60N60

Firmware for car Lexus LX570, the body of the J200,

engine: 5.7 I petrol, 3UR,

control unit: Denso,

software version: 89663-60N60,

in the firmware, catalysts (Euro2), SAP catalysts purging (you can disconnect the connector from the secondary air pump, the valve and pressure sensors must be connected), EVAP fuel tank ventilation, VSA intake manifold vortex damper and chip tuning with an increase in power and torque by 10%.

Lexus LX570 J200 Denso 89663-60C46

Firmware for car Lexus LX570, the body of the J200,

engine: 5.7 I petrol, 3UR,

control unit: Denso,

software version: 89663-60C46,

in the firmware, catalysts (Euro2), SAP catalysts purging (you can disconnect the connector from the secondary air pump, the valve and pressure sensors must be connected), EVAP fuel tank ventilation, VSA intake manifold vortex damper and chip tuning with an increase in power and torque by 10%. This firmware is an update for SOFTWARE versions: 89663-60C40, 89663-60C41, 89663-60C42, 89663-60C43, 89663-60C44, 89663-60C45

Wednesday, January 23, 2019

VW Crafter 2.0TDI CKUC EDC17C54 03L906012BK 5310 1037531690

Firmware for VW Crafter car,

engine: 2.0 TDI diesel, letter designation: CKUC,

control unit: Bosch EDC17C54,

software version: 03L906012BK_5310 1037531690,

in the firmware, the DPF particulate filter, the EGR valve, the speed limit is disabled and chip tuning is done with an increase in power and torque by 15%.

Infiniti QX70 3.0CDI EDC16CP42 1037516249

Firmware for Infiniti QX70,

engine: 3.0 CDI diesel V9X,

control unit: Bosch EDC16CP42,

software version: 1037516249,

the firmware is disabled particulate filter DPF, EGR valve.

Monday, January 21, 2019

VW Touareg 3.0TDI CASA EDC17CP14 7L0907401AB 0050 1037521072 PCMFlash

Firmware for Volkswagen Touareg car body GP,

engine: 3.0 TDI diesel, engine code: CASA,

control unit: BOSCH EDC17CP14,

software version: 7L0907401AB_0050 1037521072,

in the firmware, the EGR valve (EGR), VSA vortex dampers are disabled and chip tuning is done with an increase in power and torque by 15%. Remove the connectors from the swirl flaps and the EGR valve. This firmware is designed to write the boot loader to Flash the PCM via the diagnostic connector. Connect the charger while recording. This software can update older versions: 7L0907401AB_0020, 7L0907401AB_0030, 7L0907401AB_0040 (1037500174, 1037503989, 1037509950).

Toyota Prius 1.5i hyb 1NZ-FXE Denso 89663-47062

Firmware for Toyota Prius,

engine: 1.5 I hyb petrol, 1NZ-FXE,

control unit: Denso,

software version: 89663-47062,

in the firmware, the catalyst control (Euro 2), the lower oxygen sensor and the EVAP fuel tank ventilation system are disabled.

Friday, January 18, 2019

Lexus LX570 J200 Denso 89663-60C36

Firmware for car Lexus LX570, the body of the J200,

engine: 5.7 I petrol, 3UR,

control unit: Denso,

software version: 89663-60C36,

in the firmware, catalysts (Euro2), purging of SAP catalysts (you can disconnect the connector from the secondary air pump, the valve and the pressure sensors must be connected), ventilation of the EVAP fuel tank and chip tuning with an increase in power and torque by 10%. This firmware is an update for SOFTWARE versions: 89663-60C30, 89663 - 60C31, 89663 - 60C32, 89663-60C33, 89663-60C34, 89663-60C35

SsangYang Korando New 2.0XDI D20DTF Delphi DCM3.7 UCA41C207

Firmware for car SsangYang Korando New,

engine: 2.0 XDI diesel D20DTF,

control unit: Delphi DCM3.7,

software version: UCA41C207 UCA41C00 C210AT6 149ps, the soot filter and the EGR valve (EGR) are disabled in the firmware. Firmware in KESS format.

Thursday, January 17, 2019

Skoda Octavia II 1.4TSI MED17.5.5 0261S04393 1037539289 03C906016E 9970

Firmware for Skoda Octavia car,

engine: 1.4 TSI petrol CAXA,

control unit: Bosch MED17.5.5 0261S04393,

software version: 1037539289 03C906016E 9970,

in the firmware, catalyst control is disabled (Euro 2) and chip tuning is made with an increase in power and torque by 20%.

Toyota RAV4 2.4i 2AZ-FE Denso 89663-42521

Firmware for Toyota RAV4,

engine: 2.4 I petrol, 2AZ-FE,

control unit: Denso,

software version: 89663-42521,

in the firmware, catalyst control is disabled (Euro 2) and chip tuning is made with an increase in power and torque by 10%. Firmware read T-TAG to write them the same, or KESS OBD.

Friday, January 11, 2019

Citroen C4 1.6HDI EDC16C34 1037389516

Firmware for Citroen C4 car,

engine: 1.6 HDI diesel,

control unit: Bosch EDC16C34 ,

software version: 1037389516,

in the firmware, the FAP particulate filter, the EGR valve is disabled and the monitoring of glow plugs is turned off.

Mercedes GLK X204 3.0CDI EDC17CP01 1037512412

Firmware for Mercedes GLK 3.0 CDI, body X204,

engine: 3.0 CDI diesel,

control unit: Bosch EDC17CP01, EU4OP,

software version: 1037512412,

in the firmware, the soot filter DPF is disabled (you need to do the procedure for replacing the soot filter before programming, remove the connectors from the dif sensor and temperature sensors before and after the soot filter), the EGR valve (from the EGR valve you need to remove the connector), the lambda probe, the vortex dampers of the collector.

Wednesday, January 9, 2019

Mazda 3 1.6D EDC16C3 1037370517

Firmware for Mazda 3,

engine: 1.6 diesel,

control unit: Bosch EDC16C3,

software version: 1037370517,

the EGR valve is disabled in the firmware.

Ford Focus 2.0TDCi SID803A 8M51D 10225832AA

Firmware for Ford Focus car,

engine: 2.0 TDCi diesel,

control unit: Siemens SID803 CAFO2800

software version: 8M51D 10225832AA,

in the firmware, the DPF particulate filter and the EGR valve are disabled.

Tuesday, January 8, 2019

Suzuki Grand Vitara 2.0i Denso 33921-65J1 6E50A0AL2T41

Firmware for Suzuki Grand Vitara car,

engine: 2.0 petrol,

control unit: Denso 33921-65J1,

software version: 6E50A0AL2T41,

the catalyst (Euro 2) and the lower oxygen sensor are disabled in the firmware.

Toyota Camry (XV30) 3,0i VVT-i Denso 89663-33891

Firmware for Toyota Camry car body ACV30

engine: 3.0 I VVT-I petrol, 1MZ-FE,

control unit: Denso,

software version: 89663-33891,

in the firmware, the control of catalysts (Euro 2) is disabled, the EVAP fuel tank ventilation system and chip tuning is made with an increase in power and torque by 10%.

Toyota Camry (XV30) 3,0i VVT-i Denso 89663-33881

Firmware for Toyota Camry car body ACV30

engine: 3.0 I VVT-I petrol, 1MZ-FE,

control unit: Denso,

software version: 89663-33881,

in the firmware, the control of catalysts (Euro 2) is disabled, the EVAP fuel tank ventilation system and chip tuning is made with an increase in power and torque by 10%.

Toyota Camry 2.4i Denso 89663-33581

Firmware for Toyota Camry

engine: 2.4 petrol,

control unit: Denso,

software version: 89663-33581,

in the firmware, the control of catalysts, the EVAP fuel tank ventilation system is disabled and the chip tuning is made with an increase in power and torque by 10%.

Mercedes Sprinter w906 2.2CDI EDC16C31 1037381131

Firmware for Mercedes Sprinter, w906 body,

engine: 2.2 CDI diesel,

control unit: Bosch EDC16C31,

software version: 1037381131,

the MAF mass air flow sensor is disabled in the firmware.

Volvo XC90 2.4D D5 EDC16C31 1037400202

Firmware for Volvo XC90,

engine: 2.4 g diesel, D5,

control unit: Bosch EDC16C31,

software version: 1037400202,

in the firmware, the EGR valve and the VSA intake manifold vortex dampers are disabled.

Mercedes Sprinter w906 2.2CDI CRD2.20 6519031615

Firmware for Mercedes Sprinter, w906 body,

engine: 2.2 CDI diesel,

control unit: Delphi CRD2.20,

software version: 6519031615 651-TMAB4D2 - 906M-110KW,

the tva throttle is disabled in the firmware.