Wednesday, October 31, 2018

Subaru Legacy 3.0i Denso 4B4A346107 D2UH003R

Firmware for Subaru Legacy car,

engine: 3.0 I, petrol,

control unit: Denso 7058, 4B4A346107,

software version: D2UH003R 33092304,

in the firmware, catalyst control (Euro 2), EGR valve, EVAP fuel tank ventilation is disabled and chip tuning is made with an increase in power and torque by 10%.

Mercedes ML350CDI EDC17CP46 1037534297

Firmware for Mercedes ML350CDI car,

engine: 3.0 CDI diesel,

control unit: Bosch EDC17CP46,

software version: 1037534297,

in the firmware, the AdBlue urea injection system is disabled (you need to remove the connector from the urea control unit in the trunk, under the spare wheel and from the second NOx sensor).

Monday, October 29, 2018

Lexus RX350 3.5i Denso 89663-08130

Firmware for Lexus RX350 car,

engine: 3.5 I petrol, 2GR-FE,

control unit: Denso,

software version: 89663-08130,

in the firmware, catalysts (Euro 2) are disabled, EVAP fuel tank ventilation and chip tuning is made with an increase in power and torque by 10%, the speed limit is shifted to 250 km / h.

Nissan Pathfinder 2.5DCI R51 Denso E311U4D T2H2D220D6

Firmware for Nissan Pathfinder, R51 body

engine: 2.5 DCI diesel,

control unit: Denso SH7058 E311U4D,

software version: T2H2D220D6,

the firmware disabled the EGR valve (with EGR valve you need to remove the plug).

Jaguar XF 3.0i Denso 8X2314C568DA 8X23-14C570-DBD 8X23-14C568-DA

Firmware for Jaguar XF car,

engine: 3.0 I petrol,

control unit: Denso 8X23-14C568-DA LR27XV6000,

software version: 8X2314C568DA 8X23-14C570-DBD,

in the firmware, the control of catalysts (Euro2) is disabled.

Friday, October 26, 2018

Toyota Land Cruiser Prado 120 2.7i 2TR-FE Denso 89663-60D70

Firmware for Toyota Land Cruiser Prado car,

engine: 2.7 I petrol, 2TR-FE,

control unit: Denso,

software version: 89663-60D70,

in the firmware, the control of catalysts (Euro 2), the SAP catalyst purge system (for proper operation, you need a connected SAP pressure sensor or an installed resistance equal to a working SAP pressure sensor), the EVAP fuel tank ventilation system and chip tuning with an increase in power and torque by 10% are disabled.

SsangYang Kyron 2.0XDI Delphi DCM3.2 NCA38A02 D120M5EC NCA30A00

Firmware for SsangYang Kyron vehicle,

engine: 2.0 XDI diesel,

control unit: Delphi DCM3.2,

software version: NCA38A02 D120M5EC NCA30A00,

the firmware has disabled the EGR valve (EGR).

Peugeot 3008 1.6HDI Simens SID807 822576623 10181669AA CAPR1C00

Firmware for Peugeot 3008 car,

engine: 1.6 HDI diesel,

control unit: Continental SID807,

software version: 822576623 10181669AA CAPR1C00,

in the firmware, the DPF particulate filter is disabled(you can remove the connectors from the Dif-pressure sensor and the temperature sensors of the particulate filter) and the EGR valve (you can remove the connector from the EGR valve).

Thursday, October 25, 2018

Toyota Camry 2.4i Denso 89663-33702

Firmware for Toyota Camry

engine: 2.4 I petrol,

control unit: Denso,

software version: 89663-33702,

in the firmware, catalyst control, EVAP fuel tank ventilation system is disabled and chip tuning is made with an increase in power and torque by 10%.

Tuesday, October 23, 2018

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60C60

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60C60,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Citroen Jamper 2.2HDI SID208 9676721380 10283342AA CAFRRE40

Firmware for Citroen Jumper car,

engine: 2.2 HDI diesel,

control unit: Simens / Continental SID208 9676721380,

software version: 10283342aa CAFRRE40,

in the firmware, the DPF particulate filter and the EGR valve are disabled.

Monday, October 22, 2018

Nissan X-Trail 2.0i Hitachi 18H701

Firmware for Nissan x-Trail,

engine: 2.0 I petrol,

control unit: Hitachi 7055,

software version: 18H701,

in the firmware, the catalyst (Euro2) is disabled, the EVAP fuel tank ventilation and chip tuning is made with an increase in power and torque by 10%. The checksum is calculated.

Nissan X-Trail 2.5i Hitachi 18H972

Firmware for Nissan x-Trail,

engine: 2.5 I petrol,

control unit: Hitachi 7055,

software version: 18H972,

in the firmware, the catalyst (Euro2) is disabled, the EVAP fuel tank ventilation and chip tuning is made with an increase in power and torque by 10%. The temperature of fans switching on is lowered. The checksum is calculated.

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60A21

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60A21,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Toyota Ist 1.5i 1NZ-FE Denso 89663-52F60

Firmware for Toyota Ist

engine: 1.5 VVT-I petrol,

control unit: Denso,

software version: 89663-52F60,

in the firmware, the EGR valve is disabled, the lower oxygen sensor and chip tuning is made with an increase in power and torque by 10%.

Friday, October 19, 2018

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60871

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60871,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Toyota Land Cruiser Prado 120 2.7i 2TR-FE Denso 89663-60860

Firmware for Toyota Land Cruiser Prado car,

engine: 2.7 I petrol, 2TR-FE,

control unit: Denso,

software version: 89663-60860,

in the firmware, the control of catalysts (Euro 2), the SAP catalyst purge system (for proper operation, you need a connected SAP pressure sensor or an installed resistance equal to a working SAP pressure sensor), the EVAP fuel tank ventilation system and chip tuning with an increase in power and torque by 10% are disabled.

Mercedes GL350CDI X166 EDC17CP46 1037534292

Firmware for Mercedes GL350CDI,

engine: 3.5 CDI diesel,

control unit: Bosch EDC17CP46,

software version: 1037534292 CR60-BJL1 - 166XA-642LS EU6OPS,

in the firmware, the AdBlue urea injection system is disabled (you need to remove the connector from the urea control unit in the trunk, under the spare wheel).

Lexus GX460 URJ150 Denso 89663-60K01 SAPoff

Firmware for Lexus GX460 car, body URJ150,

engine: 4.6 I petrol, 1UR,

control unit: Denso,

software version: 89663-60K01,

in the firmware, the catalysts are disabled, the SAP catalyst purge (for proper operation, you need a connected SAP pressure sensor or an installed resistance equal to the working SAP pressure sensor), the EGR valve, the intake manifold flap VSA, EVAP fuel tank ventilation.

Peugeot Boxer 2.2HDI SID208 9691799280 10299845AA FRR72E4000000

Firmware for Peugeot Boxer car,

engine: 2.2 HDI diesel,

control unit: Continental SID208 9691799280,

software version: 10299845AA FRR72E4000000,

the EGR valve is disabled in the firmware (remove the connector from the EGR valve).

Wednesday, October 17, 2018

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60820

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60820,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60760

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60760,

in the firmware, the control of catalysts is disabled (Euro 2) and chip tuning is made with an increase in power and torque by 10%.

Toyota Land Cruiser Prado 120 2.7i 2TR-FE Denso 89663-60750

Firmware for Toyota Land Cruiser Prado car,

engine: 2.7 I petrol, 2TR-FE,

control unit: Denso,

software version: 89663-60750,

in the firmware, the control of catalysts (Euro 2), the SAP catalyst purge system (for proper operation, you need a connected SAP pressure sensor or an installed resistance equal to a working SAP pressure sensor), the EVAP fuel tank ventilation system and chip tuning with an increase in power and torque by 10% are disabled.

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60550

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60550,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Toyota Land Cruiser Prado 120 2.7i 2TR-FE Denso 89663-60590

Firmware for Toyota Land Cruiser Prado car,

engine: 2.7 I petrol, 2TR-FE,

control unit: Denso,

software version: 89663-60590,

in the firmware, the control of catalysts (Euro 2), the SAP catalyst purge system (for proper operation, you need a connected SAP pressure sensor or an installed resistance equal to a working SAP pressure sensor), the EVAP fuel tank ventilation system and chip tuning with an increase in power and torque by 10% are disabled.

Toyota Land Cruiser Prado 120 V6 4.0i Denso 89663-60560

Firmware for Toyota Land Cruiser Prado car,

engine: V6 4.0 I petrol, 1GR-FE,

control unit: Denso,

software version: 89663-60560,

in the firmware, the control of catalysts (Euro 2), the EVAP fuel tank ventilation system, the intake manifold flap VSA is disabled and the chip tuning is made with an increase in power and torque by 10%.

Toyota Vitz 1.3 2SZ-FE Denso 89663-52M00

Firmware for Toyota Vitz,

engine: 1.3 VVT-I petrol, 2SZ-FE,

control unit: Denso,

software version: 89663-52M00,

in the firmware, the catalyst control (Euro 2) is disabled, the EGR valve and chip tuning is done with an increase in power and torque by 10%.

Saturday, October 13, 2018

Audi A8 4.2FSI MED9.1 0261S02607 1037398745

Firmware for Audi A8,

engine: 4.2 I, petrol,

control unit: Bosch MED 9.1 0261S02607,

software version: 1037398745,

in the firmware, catalyst control (Euro2) and EVAP fuel tank ventilation are disabled.

Toyota Highlander 3.5i dual VVT-i Denso 89663-0E340

Firmware for Toyota Highlander,

engine: 3.5 I dual VVT-i,

control unit: Denso,

software version: 89663-0E340,

in the firmware, catalysts are disabled (Euro 2) and chip tuning is made with an increase in power and torque by 10%, the speed limit is shifted to 250 km / h.

Friday, October 12, 2018

Toyota Hiace 3.0D Denso 89663-26633

Firmware for Toyota Hiace,

engine: 3.0 d diesel,

control unit: Denso,

software version: 89663-26633,

in the firmware, the DPF particulate filter, the EGR valve (the solution without the possibility of disconnecting the connectors from the sensors) is disabled and chip tuning is made with an increase in power and torque by 15%. The checksum has been recalculated.

Nissan Qashqai 2.0i Hitachi 4CMCB1PDM1 1BZ20C

Firmware for Nissan Qashqai,

engine: 2.0 I petrol,

control unit: Hitachi 7055,

software version: 4CMCB1PDM1 1BZ20C,

in the firmware, catalyst control (EURO2), EVAP fuel tank ventilation is disabled and chip tuning is made with an increase in power and torque by 10%. The checksum has been recalculated.

Toyota Corolla 1.5i 1NZ-FE Denso 89663-12342

Firmware for Toyota Corolla

engine: 1.5 VVT-I petrol,

control unit: Denso,

software version: 89663-12342

in the firmware, the EGR valve is disabled, the lower oxygen sensor and chip tuning is made with an increase in power and torque by 10%.

Wednesday, October 10, 2018

Mercedes S350CDI BlueTec EDC17CP57 1037551857 CR61-DDH3-222WVA-642LS

Firmware for Mercedes s350cdi BlueTec, W222,

engine: 3.5 CDI diesel,

control unit: Bosch EDC17CP57,

software version: 1037551857 CR61-DDH3-222WVA-642LS EU6OPS,

in the firmware, the AdBlue urea injection system is disabled (you need to remove the chips from the adBlue unit, the second NOx sensor), the DPF particulate filter (you need to remove the chips from the differential pressure sensor and exhaust gas temperature sensors), the EGR valve and the intake manifold vortex dampers.

Monday, October 8, 2018

Lexus GX470 UZJ120 Denso 89663-60D00

Firmware for car Lexus GX470, body UZJ120,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60D00,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus GX470 UZJ120 Denso 89663-60841

Firmware for car Lexus GX470, body UZJ120,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60841,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus GX470 UZJ120 Denso 89663-60840

Firmware for car Lexus GX470, body UZJ120,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60840,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus GX470 UZJ120 Denso 89663-60710

Firmware for car Lexus GX470, body UZJ120,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60710,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus GX470 UZJ120 Denso 89663-60522

Firmware for car Lexus GX470, body UZJ120,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60522,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Sunday, October 7, 2018

Lexus LX470 4.7i Denso 89663-60781

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60781,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus LX470 4.7i Denso 89663-60731

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60731,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus LX470 4.7i Denso 89663-60730

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60730,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus LX470 4.7i Denso 89663-60652

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60652,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus LX470 4.7i Denso 89663-60651

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60651,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Lexus LX470 4.7i Denso 89663-60650

Firmware for Lexus LX470 car,

engine: 4.7 I petrol, 2UZ,

control unit: Denso,

software version: 89663-60650,

the firmware disabled the catalysts (Euro2), purge system of the SAP catalysts (for correct work you need a connected pressure sensors installed SAP or resistance, equal to a serviceable pressure SAP), the ventilation system of the fuel tank and EVAP made the chip-tuning with increasing power and torque by 10%.

Friday, October 5, 2018

Suzuki Grand Vitara 2.0i Denso 33920-65J0 33920-77K0 8E73A0AL4T41

Firmware for Suzuki Grand Vitara car,

engine: 2.0 I petrol,

control unit: Denso 33920-65J0,

software version: 33920-77K0 8E73A0AL4T41,

in the firmware, the catalyst is disabled (Euro 2), chip tuning is made with an increase in power and torque by 10%.

Mercedes ML280CDI W164 2.8CDI EDC16CP31 1037386940 P20942P7

Firmware for Mercedes ML280CDI, w164 body,

engine: 2.8 CDI diesel,

control unit: Bosch EDC16CP31,

software version: 1037386940 P20942P7 CR4-642-42P7-164WASS-140kW,

in the firmware, the DPF particulate filter, EGR valve, VSA vortex dampers are disabled (remove the connectors from the differential pressure sensor and exhaust gas temperature sensors, from the EGR valve, from the intake manifold vortex damper actuators) and chip tuning is done with an increase in power and torque by 15%.

Wednesday, October 3, 2018

Land Rover Range Rover 4.2SC Denso LR27XV6000 NNN500412 52514

Firmware for car Land Rover Range Rover,

engine: 4.2 Supercharged gasoline,

control unit: Denso LR27XV6000,

software version: NNN500412 52514,

in the firmware, catalyst control is disabled (Euro 2).

Tuesday, October 2, 2018

Infiniti FX50S 5.0i Hitachi 9TFVNYNC 11CR1A

Firmware for Infiniti FX50S vehicle,

engine: 5.0 I petrol,

control unit: Hitachi,

software version: 9TFVNYNC 11CR1A,

in the firmware, the control of catalysts (Euro2), ventilation of the EVAP fuel tank is disabled and chip tuning is made with an increase in power and torque by 8%.

Infiniti FX45 4.5i Hitachi 3TFPSNF 1CG766

Firmware for Infiniti FX45 car,

engine: 4.5 I petrol,

control unit: Hitachi,

software version: 3TFPSNF 1CG766,

in the firmware, the control of catalysts (Euro 2) is disabled, the ventilation of the EVAP fuel tank and chip tuning is made with an increase in power and torque by 10%.

Infiniti FX45 4.5i Hitachi 3TFJLN9 1CG210

Firmware for Infiniti FX45 car,

engine: 4.5 I petrol,

control unit: Hitachi,

software version: 3TFJLN9 1CG210,

in the firmware, the control of catalysts (Euro 2) is disabled, the ventilation of the EVAP fuel tank and chip tuning is made with an increase in power and torque by 10%.

Infiniti FX50S 5.0i Hitachi 1TFV5MN3 11WY1B

Firmware for Infiniti FX50S vehicle,

engine: 5.0 I petrol,

control unit: Hitachi,

software version: 1TFV5MN3 11WY1B,

in the firmware, the control of catalysts (Euro2), ventilation of the EVAP fuel tank is disabled and chip tuning is made with an increase in power and torque by 8%.

Monday, October 1, 2018

Audi A4 B7 3.0TDI EDC16CP34 8E0910401E 0020 1037376566

Firmware for Audi A4 body B7,

engine: 3.0 TDI, diesel,

control unit: Bosch EDC16CP34,

software version: 8E0910401E 0020 1037376566,

in the firmware, the DPF particulate filter, EGR valve, VSA intake manifold dampers are disabled and chip tuning is done with an increase in power and torque by 20%.

SsangYang Kyron 2.0XDI Delphi DCM3.2 NCA38A02 D120A5EC NCA30A00

Firmware for SsangYang Kyron vehicle,

engine: 2.0 XDI diesel,

control unit: Delphi DCM3.2,

software version: NCA38A02 D120A5EC NCA30A00,

the firmware disabled the EGR valve (EGR) and made the chip-tuning with increased horsepower and torque by 15%.