Thursday, December 3, 2020

BMW 520D F10 2.0D EDC17C50 O_7HKL0-0000287B-007 B47D20O0-F10B47O0

 Firmware for BMW 520D car body F10,


engine: 2.0 diesel,


control unit: Bosch EDC17C50,


software version: O_7HKL0-0000287B-007 B47D20O0-F10B47O0,


in the firmware, the AdBLUE urea injection system, DPF particulate filter, EGR valve, VSA flaps are disabled and chip tuning is made with an increase in power and torque by 20%. Remove the connector from the AdBLUE unit! You can remove the connectors from the particulate filter sensors, EGR valve, and VSA flaps. Firmware in Full Flash K-TAG format. The flow of the application.

BMW 325i E90 2.5i MSV70 0049PP0L911S0BI3S CA9PP91L.DAT

 Firmware for BMW 325i body E90,


engine: 2.5 petrol,


control unit: Siemens MSV70,


software version: 0049PP0L911S0BI3S CA9PP91L. DAT,


in the firmware, the control of catalysts is disabled (Euro 2). You can disconnect the connectors from the lower oxygen sensors.

BMW X5 E70 4.8i MEV9.4.6 0087330WB00B0O7X7 1037501230

 Firmware for BMW X5 E70 body,


engine: 4.8 petrol,


control unit: Bosch MEV9.4.6 0261209253,


software version: 0087330WB00B0O7X7 1037501230,


in the firmware, the control of catalysts is disabled (Euro 2). You can disconnect the connectors from the lower oxygen sensors.

BMW 325D E90 2.5D EDC16CP35 0089RS0AAE3BEJ110 1037390904

 Firmware for BMW 325D body E90,


engine: 2.5 diesel, N47D20


control unit: Bosch EDC 16CP35,


software version: 0089RS0AAE3BEJ110 1037390904,


the DPF particulate filter and EGR valve and VSA vortex flaps are disabled in the firmware.

Audi Q3 2.0TFSI MED17.5.2 1037544837 8U0907115F 0003

 Firmware for Audi Q3,


engine: 2.0 TFSI, petrol, CGMA


control unit: Bosch MED17. 5. 2,


software version: 1037544837 8U0907115F_0003,


in the firmware, catalyst control (Euro 2), fuel tank ventilation system (EVAP), vortex dampers (VSA) are disabled. You can remove the connector from the lower oxygen sensor.

Hyundai Accent 1.6GDI MED17 GGMD-BD-6PS01C00

 Firmware for Hyundai Accent car,


engine: 1.6 petrol,


control unit: Bosch ME17,


software version: GMD-BD-6PS01C00,


in the firmware, the catalyst control is disabled (Euro 2), the lower oxygen sensor and chip tuning is made with an increase in power and torque by 10%

Chrysler Voyager 2.8CRDI EDC16CP31 1037396550 P_5386

 Firmware for the Chrysler Voyager car,


engine: 2.8 CRD diesel,


control unit: Bosch EDC16CP31,


software version: 1037396550 P_5386,


the firmware disabled the DPF particulate filter, EGR valve and made chip tuning with an increase in power and torque by 15%. You can remove the connectors from the sensors of the particulate filter and the EGR valve.

VW Passat B6 2.0TDI EDC17CP14 03L906022CL 9982 1037564569

 Firmware for Volkswagen Passat B6,


engine: 2.0 TDI diesel, CBAB


control unit: Bosch EDC17CP14,


software version: 03L906022CL 9982 1037564569,


in the firmware, the DPF particulate filter, EGR valve and VSA intake manifold swirl flap are disabled and chip tuning is made with an increase in power and torque by 20%. Remove the connector from the VSA swirl flap drive. You can remove the connectors from the sensors of the particulate filter and the EGR valve. Firmware in PCM Flash format for recording on the OBD.

VW Golf MK7 1.4TSI MED17.5.21 1037555230 04E906016DF 9024

 Firmware for VW Golf MK7,


engine: 1.4 TSI petrol, CXSA


control unit: Bosch MED17. 5. 21,


software version: 1037555230 04E906016DF_9024,


the firmware disabled the catalyst control (Euro 2), EVAP tank ventilation, VSA intake manifold flap and made chip tuning with an increase in power and torque by 20%. You can remove the connector from the lower oxygen sensor. Firmware in PCM Flasher format for recording via the OBD diagnostic connector.

Nissan Murano 3.5 V6 Hitachi 1CB800

 Firmware for Nissan Murano,


engine: 3.5 petrol,


control unit: Hitachi SH7058,


software version: 1CB800,


in the firmware, the catalyst control (Euro 2), EGR valve, EVAP tank ventilation are disabled and chip tuning is made with an increase in power and torque by 10%. You can remove the connectors from the lower oxygen sensors.